Home
About Us
Company Profile
Enterprise culture
Qualification Certification
Development process
Products
Oil-free air compressor
DC air compressor
AC air compressor
Vacuum pump
Air System Solutions
Rail Transit Industry
Laboratory Testing
New energy electric bus
Nitrogen generator
Medical industry
Dental therapeutic apparatus
Portable compressor solution
Post-processing equipment
Adsorption dryer
Membrane dryer
Filter
Hydrogen Energy Solutions
AD-SALE
AST
System Accessories
Electric proportional valve
Hydraulic proportional valve
Pressure Sensors/Transmitters
Mass flow meter/controller
Pressure switch
Level switch
Flow switch
Metal powder sintering
Other
Application
Aerospace
Textile
Pharmaceutical Industry
Refrigeration industry
Rail Transit
Water Treatment & Sewage Treatment
Food & Beverage
Chemical reagent
Automotive industry
Tire manufacturing
Die casting industry
News
Company News
Industry dynamics
Technical exchange
Contact Us
Online message
Recruitment Information
中文
English
Flow control in a laser charging chamber Proportionair an electrical proportional valve
This sketch shows a laser charging chamber flow control application that requires 3 gas mixtures that can be dynamically adjusted. Three F Series closed loop flow controllers were used-one for each gas control. The mixture can be changed by adjusting the command signal of the corresponding flow controller. Since this is a closed loop control scheme, the signal from the flow monitor can be used for data acquisition. This signal is available on pin 5 of the FQPV2 main electrical connector. QB3 is also used in this application to control the vacuum in the charging chamber. The vacuum level is a critical component that requires repeatable control to help maintain the proper level of each gas in the charging chamber.
11
2024
/
03
Proportional electrical proportional valves offer solutions for pressure and flow control in custom machinery
Proportion-Air's closed-loop technology is used in many custom machinery and OEM applications. It is our job to understand the needs of our customers and provide perfect solutions. We are happy to provide private labels and custom data for our OEM partners. These regulators, controls and valves meet the highest standards of quality, accuracy and repeatability. Some of the many applications include: To control the pressure of the air knife used to remove debris from the conveyor line The flow test of the new compressor by using the back pressure regulator Regulating pressure in the brewing process in beer containers • Measure back pressure before the filter clogs Pressure control of air compressor header Precise control of liquid pressure Scraper control of solder thickness in PCB manufacturing Leak Testing of Piping Devices • Load cell for second loop feedback to evacuate the air between the window panes before filling with argon Over the years, we have worked with numerous OEM suppliers in most industries. We are proud to be a partner in helping every OEM drive growth.
Application of Proportional Electric Proportional Valve in Air Bag Pressure Control
Pneumatic tables and lifts require accurate and repeatable airbag control pressures. These workbenches and lifts require less maintenance than traditional hydraulic lifting tables because there are no fluid leaks and contamination of the processed product. In this application, QB1 with PSR amplifier is used to inflate the airbag to raise and lower the workbench. Since the limit switch controls the height, changes in weight on the table will not affect the height. Single-loop control works well in this application because the response time decays just enough to compensate for back pressure and prevent oscillation. Proportion-Air products can be used to control a single airbag or multiple airbags using the same device. Usually, a foot pedal or manual controller is used to provide a command signal to our equipment, telling us to fill (raise) or vent (lower) the pressure as needed.
Application of Proportional Electric Proportional Valve in Low Pressure Aluminum Castings
Perfecting low-pressure aluminum castings for wheels requires accurate control of positive pressure to quickly move molten aluminum into the mold and obtain a finished product with higher mechanical properties (higher density) than gravity-cast wheels. In the OEM market, low pressure casting is the most common approved process for aluminum wheels. Historically, however, this process has been performed using sub-standard pressure control components. High-resolution, low-pressure control is essential for the manufacture of good parts for low-pressure aluminum castings. The QB2 and R series regulators are the industry standard for injection control. Due to its closed-loop design, QB2 is repeatable, even at pressures below 1 PSI. The device follows the ramp command signal very well, making it ideal for almost any shooting sequence. The QB2s analog monitor provides the signal from the downstream pressure sensor to the PLC for data acquisition.