Home
About Us
Company Profile
Enterprise culture
Qualification Certification
Development process
Products
Oil-free air compressor
DC air compressor
AC air compressor
Vacuum pump
Air System Solutions
Rail Transit Industry
Laboratory Testing
New energy electric bus
Nitrogen generator
Medical industry
Dental therapeutic apparatus
Portable compressor solution
Post-processing equipment
Adsorption dryer
Membrane dryer
Filter
Hydrogen Energy Solutions
AD-SALE
AST
System Accessories
Electric proportional valve
Hydraulic proportional valve
Pressure Sensors/Transmitters
Mass flow meter/controller
Pressure switch
Level switch
Flow switch
Metal powder sintering
Other
Application
Aerospace
Textile
Pharmaceutical Industry
Refrigeration industry
Rail Transit
Water Treatment & Sewage Treatment
Food & Beverage
Chemical reagent
Automotive industry
Tire manufacturing
Die casting industry
News
Company News
Industry dynamics
Technical exchange
Contact Us
Online message
Recruitment Information
中文
English
One of the applications of Proportionair proportional valve in pharmaceutical industry-pressure spraying
In this process, the Proportion-Air QB1 / PSR assembly uses pressure to spray liquid media to coat the product or inject one medium into another. The amount of liquid applied to the medium is controlled by atomizing air (liquid/air) to a specific ratio. In this case, the liquid medium/process medium ratio is critical. The atomizing air is varied to compensate for changes in the process medium flow rate detected by the flow meter in the process line. The QBX directs the PSR volume booster to achieve the higher flow rate required for the atomized liquid. This is a low accuracy setting (approximately 2-4%).
11
2024
/
03
Proportional Electric Proportional Valve to Control Pressure in Laser Cutting
Precision laser cutting requires the use of precision electronic regulators and controls. Proportion-Air offers a range of custom systems for regulating pressure in high-tech laser equipment. Applications include: Adjustment of gas mixtures in laser charging chambers Adjust the cutting machine pressure according to the cutting material. Auxiliary gas regulation of automatic laser welding equipment Gas mixing adjustment Laser cutting is the main application of our regulators. You need low-pressure oxygen to pierce the metal, and then high-pressure nitrogen to achieve a clean cut. When the laser cuts, oxygen helps burn the metal. Once the surface is pierced, switch to another gas (such as nitrogen) to keep it clean-a bit like blowing metal shavings aside to keep the cutting chips away. This precision cutting means that you do not have to further process any edge parts, thereby maximizing the efficient and economical use of materials. The normal valves that deliver these gases simply open and close without proportional adjustment. Their job is to choose the right gas based on the content of the laser cut. The work of our equipment is proportionally through mixed gases. The computer will tell our equipment when cutting, what the pressure to keep clean should be, and it will constantly adjust. In order to eliminate the possibility of fire, our equipment is nickel-plated brass instead of aluminum, which is important when dealing with excess oxygen. In addition, we remove all petroleum products from the regulator and only use lubricants that are compatible with oxygen. Before applying an oxygen-compatible lubricant, we use ultrasonic baths and other methods to verify the elimination of residues. Accuracy with repeatability Our valves not only provide safety and precision, but this precision is extremely repeatable. They are proven commodities. Our customers will tell you that our laser cut proportional valves are the most reliable in the industry.
Proportional Electric Proportional Valve Control Laser Cutting Auxiliary Gas
Depending on the material to be cut, laser cutting equipment requires a wide range of auxiliary gases and pressures. Especially steel cutters usually require higher pressure settings. The QB3H is designed and developed for laser cutting applications that use oxygen as the piercing gas and require pressures up to 500 psig. QB3H can provide variable air pressure according to metal type, thickness and cutting speed. It is controlled by computer or PLC, and its analog monitoring signal can be brought back to the controller for data acquisition. QB3H is very durable, resistant to shock and vibration, and can be installed in any direction. It can clean oxygen compatibility and provides flow rates up to 50 SCFM.
Pressure control in a laser charging chamber Proportional an electrical proportional valve
When controlling the gas entering the plenum, mass flow control is (typically) employed. However, in this sketch, we demonstrate laser charging chamber pressure control to achieve similar results. A 3-station SPV (manifold mount) pressure control assembly controls 3 different gases to a fixed (and known) orifice. By changing the pressure of the fixed orifice, the flow rate can be changed and produce predictable and repeatable results. Although not as effective and accurate as using mass flow controllers for each gas, this concept is more affordable and can produce excellent results. The simple concept behind it: if you know the exact size of the orifice, the gas density and the pressure, you can predict the flow through the orifice.