2024-03-11

Application of Proprotion-air Electric Proportional Valve in Steam Temperature Control


Tire vulcanization, food processing, and many bioreaction applications use saturated steam. Many of these processes employ complex steam control valves designed to regulate opening and closing to maintain a specific temperature. Steam temperature control need not be so complicated.
 
The temperature of saturated steam is directly related to its pressure, so it is easy to use a steam pressure regulator to achieve tighter temperature control, eliminate PID requirements and reduce temperature drift. Simply put: control the pressure of saturated steam, you can control the temperature. This is the proportional air method.
 
This figure shows the QB2/BD steam regulator and DST (sensor) proportional valve assembly used to control the saturation steam pressure. The Proportion-Air electronic regulator assembly is closed around the downstream pressure, so the required pressure (temperature) can be achieved only by providing a command signal to the QB2. An analog monitor signal output is provided at pin 5 of the main electrical connector on the QB2, which can be brought back to the controller for data acquisition.
 
The monitoring signal comes from a pressure sensor downstream of the DST, which detects the vapor pressure in the curing chamber. The figure also shows an RTD (resistance temperature detector) measuring the steam temperature in the process and sending this signal back to the PLC. This is not a required component, but an optional backup measurement for confirmation.
 
 

Temperature, steam, pressure, control, saturation, signal, qb2, regulator, component