5 Important Tips for Maintaining Compressed Air Systems in Summer

If precautions are not taken to prevent temperature increases, summer can cause serious damage to the compressed air system. In hot weather, the increase in heat and humidity, coupled with the rapid cooling of the system at night, will produce excessive moisture. This moisture can significantly increase the water load, which may cause performance degradation.
Follow these 5 tips to prepare your equipment for warm summer weather and avoid expensive downtime:
1. Install the correct filter and dry the air.
A good filtration and drying system is essential for year-round compressor efficiency, but it is especially important in summer. The high temperature during the day can cause the system to cool significantly at night, which can cause moisture in the compressed air pipeline to condense.
The first line of defense to remove excess water is the water separator, which can remove up to 99% of the water when installed.
The coalescing filter can remove fine oil mist and particles, and adjust the air to a level suitable for compressed air dryers.
Desiccant dryer is used to remove residual water vapor
2. Clean the air and oil filter.
Maintaining the filter by removing any dust or dust and repairing the filter element can make the system run more smoothly and use less energy.
3. Change the oil.
Heat and humidity affect the viscosity of the oil, so replacing it before the start of summer will help maximize its ability to lubricate the compressor.
4. Check the drain pipe.
The increase in summer humidity will mean that the drain needs to work harder to release more condensation. Check all drains on the water tank, dryer and filter to make sure they are operating properly.
5. Check the ventilation.
Ensure that the compressor room is properly ventilated and the air flow is properly regulated. Increased airflow and good ventilation will help keep the temperature lower and make the compressor work more efficiently.

5, filter, system, removal, humidity, check, summer, lead, compressor, compressed air