+
  • {UF8V%NAUI7(X`Y[W107)T5.png

P72400 Series-Sensor Transmitter with Slender Drill Hole

P72400 Series-Sensor Transmitters with Slender Boreholes The P72400 Series Immersion Pressure Transmitters are designed for long-term immersion. Even if the cable housing is damaged during use, the unique sealing design of the sensor will ensure that water will not enter the sensor. A large ventilation pipe is directly connected to the rear end of the sensor to provide rapid ventilation. The sensor element itself is also sealed, even in very humid places (these places are prone to condensation) can also be used safely for a long time. The all-soldered electronic packaging structure completely isolates the sensor from other places. These electronic designs can provide rapid connection and reduction, ensuring the maximum service life of the battery and the most simple calibration. u Triple seal, suitable for immersion installation u Response time of switch-on/reduction <10msu diameter 19mm Input pressure range 0-4 to 0-200mwg(mA & V)0-10,20,50,100mwg(mV) withstand voltage 1.5FS rupture pressure 3FS fatigue life 100,000,000 full-scale cycle performance long-term drift 0.25 FS/year (not accumulated year by year) accuracy 0.25 FS temperature error 0.5 FS(0-50 ℃) compensation temperature -10 to 50 ℃ working temperature -40 to 80 ℃ zero tolerance 1% FS mechanical structure pressure port G1/4 "external thread, 316 stainless steel, polyurethane, acetal electrical connection polyurethane cable vibration sinusoidal curve, peak value 35g,5~2000Hz Package Ip 68,200mwg Certification CE Weight About 100g (Cable Weight Plus 75 g/m) Electrical Parameters Voltage Output 0-10V Power Supply Voltage 13-28Vdc Power Supply Sensitivity 0.026%FS/Volt Current Output 4-20mA Power Supply Voltage (Vs)9-35Vdc Maximum Loop Resistance (Vs-9)× 50ohms Output 100mV ± 1mV Power Supply 10Vdc (Maximum 15Vdc) Bridge N562266 Ing Weight 3K 5±20%@ 25 ℃

Classification:

Key words:


Product Consulting

Product Description

P72400 Series-Sensor Transmitter with Slender Drill Hole

 

The P72400 series of immersion pressure transmitters are designed for long-term immersion. Even if the cable housing is damaged during use, the unique sealing design of the sensor will ensure that water will not enter the sensor. A large ventilation pipe is directly connected to the rear end of the sensor to provide rapid ventilation. The sensor element itself is also sealed, even in very humid places (these places are prone to condensation) can also be used safely for a long time. The all-soldered electronic packaging structure completely isolates the sensor from other places. These electronic designs can provide rapid connection and reduction, ensuring the maximum service life of the battery and the most simple calibration.

 

Triple seal, suitable for immersion installation

ONResponse time of/restore <10ms

Diameter19mm

 

 

Input

Pressure range

0-40-200m w g(m A & V) 0-10, 20, 50, 100m w g(m V)

Withstand voltage

1. 5FS

Rupture pressure

3FS

fatigue life

100, 000, 000 full-scale cycles

Performance

Long-term drift

0.25% FS/year(Not cumulative year by year)

Accuracy

0. 25% FS

temperature error

0. 5% FS(0-50℃)

compensation temperature

-10 °50

Working temperature

-40 °80

Zero Tolerance

1% FS

Mechanical construction

Pressure port

G 1/4 "external thread, used with nose cone

Fluid receiving parts

316 stainless steel, Polyurethane, Acetal

Electrical connection

polyurethane cable

Vibration

Sinusoid, peak35g,5 ~ 2000H with

Encapsulation

I p68,200m in g

Certification

C E

Weight

About100g(Cable weight plus75g/ m)

Electrical parameters

Voltage output

 

Output

0-10V

Supply voltage

13-28 Vdc

Power supply sensitivity

0. 026% FS/ Vol t

Current output

 

Output

4-20m A

Supply voltage (Vs)

9-35Vdc

Maximum loop resistance

(Vs-9)×50ohm s

Output

100m V±1m V

Power supply

10Vdc (max.15Vdc)

Bridge resistance

3K5±20% @ 25

Intrusion Weight

P/ N 562266


    

Previous Page

Next Page

Previous Page

Next Page

immediate consultation

If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!

Submit