Home
About Us
Company Profile
Enterprise culture
Qualification Certification
Development process
Products
Oil-free air compressor
DC air compressor
AC air compressor
Vacuum pump
Air System Solutions
Rail Transit Industry
Laboratory Testing
New energy electric bus
Nitrogen generator
Medical industry
Dental therapeutic apparatus
Portable compressor solution
Post-processing equipment
Adsorption dryer
Membrane dryer
Filter
Hydrogen Energy Solutions
AD-SALE
AST
System Accessories
Electric proportional valve
Hydraulic proportional valve
Pressure Sensors/Transmitters
Mass flow meter/controller
Pressure switch
Level switch
Flow switch
Metal powder sintering
Other
Application
Aerospace
Textile
Pharmaceutical Industry
Refrigeration industry
Rail Transit
Water Treatment & Sewage Treatment
Food & Beverage
Chemical reagent
Automotive industry
Tire manufacturing
Die casting industry
News
Company News
Industry dynamics
Technical exchange
Contact Us
Online message
Recruitment Information
中文
English
What is an air dryer?
In a pneumatic system, the compressor draws in ambient air that always contains some amount of water vapor. The process of compressing the air to approximately 100 psi raises the temperature of the air, but also raises the dew point and water holding capacity. Any subsequent cooling downstream may result in some water vapor condensation. Liquid water in a pneumatic system can create problems such as corrosion and bacterial growth, which in turn can lead to slow control or component failure.
11
2024
/
03
Why is it important to dry compressed air?
All atmospheres contain a certain amount of water vapor. Now, think of the atmosphere as a giant, slightly damp bubble. If we squeeze too hard, the absorbed water will drip down. The same happens when air is compressed, which means that the concentration of water will increase. In order to avoid future problems in the compressed air system, it is necessary to treat the humid air. This is done using an aftercooler and drying equipment. Why and how do we dry compressed air? The atmosphere contains more water vapor at high temperatures and less at low temperatures. When air is compressed, this affects the concentration of water. For example, a compressor with a working pressure of 7bar and a capacity of 200l/s, when compressing air at a relative humidity of 80% at a temperature of 20°C, will release 10 liters of water per hour in the compressed air line. Problems and disturbances may occur due to water precipitation in pipes and connected equipment. To avoid this, the compressed air must be dry. The term "pressure dew point" (PDP) is used to describe the water content in compressed air. It is the temperature at which water vapor condenses into water at the current operating pressure. A low PDP value indicates that the amount of water vapor in the compressed air is low. It is important to remember that when comparing different dryers, the atmospheric dew point cannot be compared to the PDP. For example, a PDP of +2 + C at 7bar is equivalent to -23 ˚C at atmospheric pressure. Using a filter to remove moisture (reduce dew point) does not work. This is because further cooling results in continued precipitation of condensed water. You can choose the main type of drying equipment according to the pressure dew point. When considering cost, the lower the required dew point, the higher the investment and operating costs of air drying. There are five technologies for removing moisture from compressed air: cooling plus separation, over-compression, membrane separation, absorption and adsorption drying. Different drying methods There are many ways to dry compressed air, most of which are listed below. For more information on how to choose the right dryer for your application, click here. -After cooler-Refrigerant dryer-Excessive compression-Absorption and adsorption drying (Descendant dryer)-Membrane dryer How to deal with condensate water after air drying? Anyone operating with a compressed air system (using oil injection technology) must understand how to properly dispose of condensate water in a responsible manner so as not to violate any environmental laws. The condensate released by compressed air equipment will have tiny oil particles that are invisible to the naked eye, which is why proper treatment is required. Incorrect disposal will not only damage the environment, but may also result in fines and damage to your reputation as a responsible company. In general, there are many regulations about waste disposal, because you will no doubt know if you have recently visited a local recycling center and compared it to a visit just a few years ago. Don't let the compressed air supply take you on the road before a fairly simple initial inspection. Observe the compressed air equipment: you should be able to see the condensate drain on the back of the on-site condenser and dryer. Take a look at where these pipes are connected. Ideally, you should see them all enter the oil/water separator and then blow down. If they go straight from the drain into the floor or just into standard plastic containers, a red flag should be raised. The oil/water separator is very easy to install. Please note that even if the correct equipment is installed, there are many rules surrounding the treatment of condensate, and these rules may vary from region to region.
Compressed air quality
It is essential for the user that the quality of the compressed air is correct. If air containing pollutants comes into contact with the final product, the cost of waste can quickly become unacceptably high, and the cheapest solution can quickly become the most expensive. It is important to choose the compressed air quality according to the company's quality policy, and even try to judge future requirements. Why is it important to consider air quality? Compressed air may contain harmful substances, such as water in the form of droplets or vapors, oil in the form of droplets or aerosols, and dust. Depending on the field of application of the compressed air, these substances can impair production results and even increase
What contaminants are found in compressed air?
It is essential for the user that the quality of the compressed air is correct. If air containing contaminants comes into contact with the final product, the cost of waste quickly becomes unacceptably high. In this article, we will introduce the most common pollutant in compressed air? Water vapor in compressed air The air in the atmosphere always contains moisture in the form of water vapor. Compressed air contains some water vapor and may cause problems. For example: higher maintenance costs, shortened service life and impaired tool performance, high scrap rates through painting and plastic injection, increased leakage, failure of control systems and instruments due to corrosion